Consumer
Products
Flat TV

Flat TV

51 cm (20"), LCD 20PFL4122/98

Troubleshooting

My Philips TV will not power on using the remote control, or my TV will not power on after pressing the POWER button on the side of the TV

The remote control will not operate the TV when the TV is in the OFFmode (No LED lit on front bezel). To change the mode from OFF to STANDBY or ON, press the POWER button on the side of the TV. Once the POWER button is pressed, the LED will change to either red to indicate STANDBY or green to indicate ON, whichever mode the TV was in prior to being turned off with the TV POWER button.

By pressing the POWER button on the side of the TV, the mode will toggle from OFF to either STANDBY or ON. If the POWER button is pressed and then the LED on the bezel is red, the TV is in STANDBY mode and will need to be turned on using the remote control. If the POWER button is pressed and then the LED on the bezel is green, the TV is ON.

The information on this page applies to the following models: 20PFL4122/98 , 20PF5120/98 .

Not what you are looking for?