Consumer
Products
LCD TV

LCD TV

81 cm (32"), HD Ready 32PFL3406/98

Troubleshooting

How to manually program additional channel(s) to my Philips TV?

You are able to individually add new channel(s) by following these steps:

Step 1-3

1) Press the [Menu] button on the remote control to access the [Home] menu

2) Use the cursor buttons [Up][Down][Left][Right] to select [Setup] and press the [OK] button to confirm

3) Select [Channel Settings] and press the [OK] button

the menu screen

Step 4-13

4) Select [Channel Installation] and press the [OK] button

5) If the channel lock is activated, the screen will prompt you to enter your pin code. If you have forgotten your pin code, you can reset the pin code in the [Setup] > [Channel settings] > [Child lock] > [Change code] menu. Refer to the FAQ ('I have forgotten my 4-digit pin code. How can I reset it?').

6) Select [Analogue: MANUAL ANTENNA INSTALLATION] and press the [OK] button

7) Select [Color System] and [Sound System], and press the [OK] button

  • Use the cursor [Up] or [Down] to set to the correct colour or sound system
  • If you are not sure of the colour or sound system used in your location, select [AUTO] and press the [OK] button to confirm

8) Press the cursor [Down] to select [Find channel] and press the [OK] button

  • Enter the 3 digit frequency of the channel you wish to add using the numeric buttons on the remote control and press the [OK] button twice
  • If you do not have the channel frequency at hand, press the [OK] button twice to automatically search for the channel. The searching will stop once a channel is found. If you wish to continue searching, select [Search] and press the [OK] button.

9) Once the channel is found, press the [Back] button twice

10) Press the cursor [Down] to select [STORE AS NEW CHANNEL] and press the [OK] button

11) Select [OK] and press the [OK] button to store the frequency

12) If you wish to add another channel, repeat steps 7 to 11

13) Press the[Back] button to exit the menu

Add more channels

If you wish to add more channels, you should try to perform search for channels again to restore all the channels in the TV memory.
Press the [Menu] button on the remote control to access the [Home] menu.

Step 1-2

1) Use the cursor buttons [Up][Down][Left][Right] to select [Setup] and press the [OK] button to confirm

2) Select [Search for channels] and press the [OK] button to access the automatic installation screen

the menu screen

Step 3-6

3) If the channel lock is activated, the screen will prompt you to enter your pin code. If you have forgotten your pin code, you can reset the pin code in the [Setup] > [Channel settings] > [Child lock] > [Change code] menu. Refer to the FAQ ('I have forgotten my 4-digit pin code. How can I reset it?').

4) Select [Start] and press the [OK] button to Start auto programming

5) The menu screen disappears and the progress of auto programming is displayed. The progress bar indicates the number of analogue channels found.

6) Once the installation is completed, press the [OK] button and the TV will automatically exit the menu

The information on this page applies to the following models: 32PFL3406/98 .

Not what you are looking for?