Consumer
Products
LCD TV

LCD TV

102 cm (40"), Full HD 1080p, digital TV 40PFL8664H/12

Frequently Asked Questions

What should I do when there is no picture and no sound in my Philips TV when I watch HD movie from the 'Tatung' or 'Telekom' set-top box connected via HDMI?

Update your TV with the software version 0.26.76.0, which is attached on this FAQ page.

WARNING: Do not update your TV software when you are not using the following set-top boxes:

  • Tatung STB-3xxx series
  • Telekom X102
  • Telekom X300
  • Telekom X301
  • Telekom X303

Follow below procedures on how to update your TV software.

Before you start

Ensure that you have the following:

  • A USB flash drive with at least 100 MB of free space

    WARNING: Do not use a USB hard drive for this software update.

  • A file compression application (the latest version of WinZip® is recommended)

Step 1 - Download the software update

Note:* This procedure assumes that you use a Microsoft® Windows® PC with the latest version of WinZip installed

Insert the USB flash drive into a USB port on your PC.

A. On the FAQ page, click the ‘FUS_Q5481_0.26.76.0.zip’ attachment.

The File Download window appears.

75186.gif

B. Click [Open]

The WinZip window appears.

75203.gif

C. Click [Extract].

The Extractdialog box appears.

75189.gif

D. Copy the file

Select your USB flash drive (for example, ‘Removable Disk [I:]’), then click [Extract].

The ‘autorun.upg’ software update file is copied to the root directory of your USB flash drive.

75190.gif

E. Navigate to your USB flash drive

Check if the USB flash drive contains the ‘autorun.upg’ file.

If this file is available, proceed to the next step. If the file is unavailable, repeat this procedure or contact Philips Support in your country.

75191.gif

Step 2 - Update the software on your TV

  • Switch “on” the TV set.
  • Insert the updated USB flash drive into the USB port on the side of the TV.
75192.gif

A. The TV switches off and the screen stays black for 10 seconds.

Please wait for the TV to switch back on automatically.

75193.gif

Note:

Do not use the remote control, remove the USB flash drive or use the power switch on the TV.

  • The TV switches back on again. The Software upgrade wizard appears.
  • Select [Yes] and press the [OK] button
75195.gif

B. The software update starts automatically.

Please wait for the update to finish.

This is indicated on the screen by a notification message.

75188.gif

C. Disconnect the USB flash drive from the TV.

75198.gif

D. Press [Power] standby button once on the remote control.

Note: Do not press the [Power] standby button twice or use the power switch on the TV.

75199.gif

E. The TV switches off and the screen stays black for 10 seconds.

Please wait.

75200.gif

F. The TV switches back on again.

The TV software is now up-to-date.

75201.gif

Note:

To prevent accidental updates to the TV software, delete the ‘autorun.upg’ file from the USB flash drive.

The information on this page applies to the following models: 40PFL8664H/12 , 52PFL5604H/12 , 42PFL8404H/12 , 47PFL8404H/12 , 47PFL7404H/12 , 52PFL7404H/12 , 32PFL7404H/12 , 37PFL8404H/12 , 32PFL5404H/12 , 37PFL5604H/12 , 47PFL5604H/12 , 42PFL5604H/12 , 42PFL7404H/12 . more less

Troubleshooting

Settings(11)
Audio(2)
First use and Installation(1)
Channel and Signal input(2)
Internet and Smart TV(1)
Performance(1)
Video(2)
Parent unit(1)

Not what you are looking for?