Consumer
Products
LED TV

LED TV

117 cm (46"), Full HD 1080p, digital TV 46PFL9705H/12

Troubleshooting

How to connect my Philips TV to a wireless network (WLAN)?

To connect your TV with your wireless network, you only need a compatible WLAN-Router. Your TV is able to receive WLAN without additional accessories.

Step 1

Press [Home] on your remote control and select [Setup].

Step 2

Select [Connect to network] and confirm by pressing [OK].

Step 3

Select [Wireless] and press [OK].

Step 4

Go to [Scan] and confirm.

Step 5

Select your network and confirm with [OK].

Note: The displayed network name varies, depending on your router.

Step 6

Select [Enter key] and press [OK].

Note: The encryption key must only be entered once. Your TV will save the entered key.

Step 7

Use the numeric keys on your remote control to enter the encryption key and confirm [Done] by pressing the [OK] button.

Note: The encryption key is set by the router and is usually located on the back or bottom of the router.

Step 8

Confirm [Next] by pressing [OK].

Step 9

Connecting may take several minutes, please have patience.

Step 10

Please press [OK] once the connection is completed.

Step 11

A note on network function appears, press the [OK] button to complete the connection.

Step 12

After completing the network connection, a wizard for setting up a video store automatically appears on screen. Confirm [Cancel] by pressing [OK] to exit the wizard.

Now your TV is connected to your network.

The information on this page applies to the following models: 46PFL9705H/12 , 40PFL9705H/12 .

Troubleshooting

First use and Installation(1)
Audio(1)
Settings(11)
Internet and Smart TV(5)
Other faults(2)
Error notifications(1)

Not what you are looking for?