Consumer
Products
Wireless hi-fi headphones

Wireless hi-fi headphones

40mm drivers/closed-back, Over-ear, Soft ear cushions SHC8535/10

Troubleshooting

How to setup my Philips SHC85 Hi-Fi headphones?

In order to be able to enjoy your favourite music from Philips SHC85 headphones, please follow these simple first time setup steps described below:

1. Unscrew and remove the LEFT ear cushion of the headphones

Remove cushion of Philips headphones

2. Insert the only Philips shortened sleeve rechargeable NiMH batteries into the battery compartment

Philips short sleeve NiMH batteries

3. Put the LEFT ear cushion back into place

Adjust cushion of Philips headphones

4. Connect the AC/DC adapter to the transmitter and the main power supply

Philips headphone adapter

5. To charge the headphones, place the headphones onto the energizing docking station

Tip: Before using the headphones for the first time, charge the supplied batteries for at least 16 hours.

Charging of Philips headphones

6. Connect the transmitter to an audio device with the stereo cable. The red LED is on when it is connected

Tip: If the volume of the audio source is insufficient, the transmitter automatically turns off.

Philips headphones blink RED

7. Power on the headphones and the red LED is on

Philips headphones blink RED

8. Press and hold 'AUTO TUNING' on the headphones for one second to tune to the correct transmission channel

Auto tuning

9. If there is interference from other transmitters

Adjust the transmission channel of the transmitter at the back, then repeat step 8.

Adjust the transmission channel

10. Adjust the volume of the headphones to the suitable listening level

Adjust the volume on Philips headphones

The information on this page applies to the following models: SHC8535/10 , SHC8535/69 .

Not what you are looking for?

Did we answer your question?

If not, contact us.