Consumer
Products
Azur Performer Plus Steam iron

Azur Performer Plus Steam iron

Steam 45g/min;190g steam boost, SteamGlide Plus soleplate, Safety Auto off + Anti-calc, 2400 Watts GC4517/20

Troubleshooting

My Philips iron doesn't heat and a light is flashing

If you notice your iron doesn't heat up and a red or blue iron blinks, please read here about it.

The iron is in Auto Switch-Off

If your iron is left unused horizontally for more than 2 minutes, or vertically (heel rest) for more than 8 minutes, it switches off automatically for safety reasons.

When this happens, the red or blue automatic shut-off light flashes.

Pressing any button will turn the iron on and it will start heating up again.

After approx. 2 min. it will be ready for ironing.

If your iron is a Pressurized steam generator (GC90xx): once you hear 2 beeps and the light in the active steam selection button stops flashing and stays on, you can start steam ironing by pressing the steam trigger (see chapter 'Using the iron' in the user manual).

The information on this page applies to the following models: GC4517/20 , GC4517/26 , GC4516/40 , GC4516/46 , GC9642/66 . more less

Not what you are looking for?