Consumer
Products
Saeco Exprelia Super-automatic espresso machine

Saeco Exprelia Super-automatic espresso machine

Integrated milk jug & frother, Stainless steel, 5 step adjustable grinder HD8856/01

Troubleshooting

I cannot complete descaling my Saeco Exprelia

If you cannot complete your Saeco Exprelia espresso machine's descaling procedure, there might be a simple cause. Please read along how to resolve this.

Clean and dry the drip tray

The machine cannot detect that the internal drip tray has been emptied and placed back because the internal drip tray is dirty or condensation developed inside the machine.

  1. Do not turn off the machine
  2. Open the service door and take out the internal drip tray
  3. Clean the internal drip tray with lukewarm water with some washing-up liquid.
    Note: Make sure that the area where the drip tray is located is also clean
  4. Dry the internal drip tray and place it back into the machine
  5. Dry the inside of the service door
  6. Dry the outside of the water tank and place it back
  7. Close the service door
  8. Press the OK button
  9. The machine will continue with the next step of the descaling procedure
  10. If the message still does not disappear, please contact the Consumer Care Center in your country
driptrayexprelia.gif

The information on this page applies to the following models: HD8856/01 , HD8856/08 .

Troubleshooting

Leaking(2)
Grinder(2)
Performance(3)
Dispensing(4)
Error notifications(3)
Heat issues(1)
Milk(1)
Alarm(3)
Noise(2)
Power/ Charging / Battery life(1)
Functionality(1)
Display(1)
Brew group(2)

Not what you are looking for?