The mopping brushes are cleaned when you flush your AquaTrio Pro after use. If the brushes are still dirty after flushing, you can remove them from the nozzle and clean them with warm or cold running water.
- Lift the mopping brushes out of the mopping nozzle by their lime green grips.
- Clean the mopping brushes by rinsing them with running water. If you want, you can use a liquid household cleaner or some dishwashing liquid.
- Put the mopping brushes on the clean mopping brush cover to dry.
- Place the brushes back. Make sure the mopping brushes are dry when they are placed into the appliance. If they are not dry, the active protection system may be activated when you switch on the appliance because the brushes encounter too heavy resistance due to being still too wet.
Note: The mopping brushes are not washing machine-proof.
If the above solution(s) did not help to solve your problem, please contact Philips Consumer Care Center in your country.