Consumer
Products
Azur Performer Steam iron

Azur Performer Steam iron

Steam 40g/min;140g steam boost, SteamGlide soleplate, Anti-calc, 2400 Watts GC3803/30

Troubleshooting

My Philips Steam iron (vertical) steam boost does not work

If your Philips Steam iron vertical steam or steam boost function does not operate, there might be a simple solution. Just follow these tips and tricks.

Tips and tricks:

  1. The (vertical) steam boost function has been used too often within a very short period
    Put the iron in horizontal position and wait for a while before using the (vertical) steam boost function again.

  2. The iron is not hot enough
    Set the temperature dial to a temperature suitable for steam ironing (between “3 dot” to MAX temperature setting).
    Note: Dial graphics is for illustration purpose only and may differ from the dial of specific models.

  3. Put the iron on its heel and wait until the temperature light has gone out before you start ironing

Temperature dial

The information on this page applies to the following models: GC3803/30 , GC3811/70 , GC3569/02 , GC5050/02 , GC5050/27 , GC4850/02 , GC4891/27 , GC4891/02 , GC4870/27 , GC4870/02 , GC4860/27 , GC4860/02 , GC4850/27 , GC2965/02 , GC2965/27 , GC3720/02 , GC3720/27 , GC2710/02 , GC3760/27 , GC3760/02 , GC3740/27 , GC3740/02 , GC2960/27 , GC2960/02 , GC2930/27 , GC2930/02 , GC2920/27 , GC2920/02 , GC2910/27 , GC2910/02 , GC2710/27 , GC2920/07 , GC2960/12 , GC2960/07 , GC2930/12 , GC2930/07 , GC3620/27 , GC3660/27 , GC3640/02 , GC2810/02 , GC4610/27 . more less

Not what you are looking for?